manualshive.com logo in svg

Xante Accel-a-Graphix CT4, User Manual

Share
Download
Xante Accel-a-Graphix CT4 User Manual Download Page 151

___________________________________  Routine Operations  6-23

Printer1 Color Palette

The Printer1 Color Palette options can be set through the PPD or the
front panel. This menu allows you to choose whether to use the HP
palette information. Options are Printer’s default, True, or False.
True directs the controller to send HP palette information to the
printer at the start of every job. This information is not sent if False
is chosen.

HP palette information is necessary for HP and CalComp printers but
not for the NOVAJET. If you send palette information with the job,
you can only print a one-color black. However, if you print on a
NOVAJET with a False setting, a Cyan and Black pixel prints. Thus,
with the HP palette, you cannot do process black.

Note:

You will see a color palette menu for each enabled printer
that is attached to the controller.

Fig. 6.22  The Printer1 Color Palette Options

Summary of Contents for Accel-a-Graphix CT4























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands