Xante Accel-a-Graphix CT4, User Manual

Page: 63 / 310

_____________________________________ Macintosh Setup 3-5
4. Click Setup… in the Chooser window (fig. 3.1). A setup
dialog box similar to the following appears (fig. 3.2).
Printer Info...
Select PPD...
Current Printer Description File (PPD) Selected:
“Generic”
Help
OK
Auto Setup
Configure... Cancel
Fig. 3.2 Selecting the PPD
5. Click Auto Setup… (fig. 3.2). The system automatically
selects and configures the correct PPD for your printer.
6. Click OK when the Auto Setup process is complete to accept
the selections.
7. An icon appears next to the controller you selected. Close the
Chooser window. The configuration of your PPD is complete.
Note: If the Auto Setup feature does not properly select and
configure the PPD for your controller, go to the Manual
Setup procedure, below.
Using Manual Setup
You can also manually select and configure the Accel-a-Graphix
CT4 PPD, after the PSPrinter driver is installed.
1. Go through the first four steps listed in the Auto Setup section.
2. Click Select PPD… (fig. 3.2). A screen appears from which
you can select a PPD file.
3. Locate and highlight your controller’s PPD in the Printers
Description folder inside the Extensions folder in your System
Folder.
4. Click Select to confirm the PPD choice. You return to the
dialog box (fig. 3.2).