manualshive.com logo in svg

Xante Accel-a-Graphix CT4, User Manual

Share
Download
Xante Accel-a-Graphix CT4 User Manual Download Page 239

___________________________________  Color Management  8-37

8.

Select Print from File menu. The Print dialog box appears.

Fig. 8.31  The Print Dialog Box

9.

Click Options. The Print Options window appears.

Note:

The Accel-a-Graphix CT4 must be selected in the
Chooser and its PPD selected for all the controller
PPD options to be active in the bottom of the Print
Options window.

Fig. 8.32  The Print Options Window

10.

Make sure the following PPD features are selected in the
bottom scroll box; any features not listed should be set to the
printer’s default.

a.

Screen Type: should be set to X-screen.

b.

Printer Enable should be set for the printer(s) you are
using.

Summary of Contents for Accel-a-Graphix CT4























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands