Xante Accel-a-Graphix CT4, User Manual

Page: 257 / 310

______________________________________ Troubleshooting 9-11
• Remove any LaserPrep files from the System and
Extensions folders.
• Turn both your Macintosh and controller off and
then back on again.
• Select the Chooser from the Apple menu, make
sure LocalTalk is active, and select the controller.
• If you have an Ethernet setup, select Control
Panels from the Apple menu; then select Network
and make sure EtherTalk is selected.
• Continue printing as usual.
§ The Controller does not show up on the Chooser.
∞
Possible Solutions:
• Check for proper termination on all LocalTalk
cables and boxes. See “Connecting in a Macintosh
Environment” in chapter 2 for details.
• If you have an Ethernet setup, make sure all
Ethernet cabling is connected correctly. See your
network documentation for details.
• Make sure the current interface is enabled.
• Disable all background printing and print spoolers.
• Try a new cable between your Macintosh
computer and the controller.
• Reboot the controller and your computer. Try
selecting the controller from the Chooser again.