Xante Accel-a-Graphix CT4, User Manual

Page: 123 / 310

_______________________________________ Configuration 5-29
The Mode Menu
The Mode menu, RS232:MODE, allows you to select the PostScript
mode. Options are PS STD, PS BIN, and PS TBCP. The factory
default is PS STD.
PS STD for standard PostScript
PS BIN for binary PostScript
PS TBCP for tagged binary communication protocol
PostScript
The Baud Rate Menu
The Baud Rate menu, RS232:BAUD RATE, allows you to select a
baud rate of 1200, 9600, and 19200 bps (bits per second). The
factory default rate is 9600.
The Parity Menu
The Parity menu, RS232:PARITY, allows you to select none, even,
odd, mark, or space parity. The factory default parity is NONE.
The Flow Control Menu
The Flow Control menu, RS232:FLWCNTL, allows you to select
XON/XOFF (software) or DTR (hardware) flow control. The factory
default is XON/XOFF.
The Data Bits Menu
The Data Bits menu, RS232:DATA BITS, allows you to select either
7 or 8 data bits. The factory default is 8.
To change this numeric value once you are in this menu, use the Left
Arrow
←
key to lower the value or use the Menu
→
key to raise the
value to the desired amount; then, press the Enter
↓
key to confirm
the selection.
The Stop Bits Menu
The Stop Bits menu, RS232:STOP BITS, allows you to select either
1 or 2 stop bits. The factory default is 1.