Xante Accel-a-Graphix CT4, User Manual

Page: 124 / 310

5-30 Configuration bb ______________________________________
To change this numeric value once you are in this menu, use the Left
Arrow
←
key to lower the value or use the Menu
→
key to raise the
value to the desired amount; then, press the Enter
↓
key to confirm
the selection.
The Spool Menu
The Spool menu, RS232:SPOOL, allows you to enable (YES) or
disable (NO) spooling to the RS232 interface. The factory default is
NO. (See “Using the Spooler” in chapter 6 for more details.)
The Parallel Menu
The Parallel menu, I/F:PARALLEL, allows you to configure the
parallel interface. The Parallel menu includes the following submenus.
• ENABLE
• MODE
• BUFFER
• SPOOL
MENU
ENTER
I/F: PARALLEL
ENABLE: YES
enable: no
PARALLEL: ENABLE
MODE: PS STD
mode: ps bin
mode: ps tbcp
PARALLEL: MODE
PARALLEL: BUFFER
buffer: 8K
buffer: 16K
buffer: 32K
buffer: 64K
BUFFER: 128K
buffer: 256K
buffer: 512K
buffer: 1024K
buffer: 2048K
buffer: 4096K
PARALLEL: SPOOL
spool: yes
SPOOL: NO
Fig. 5.17 The Parallel Menu