6.11. Input Contact Alarm Status Screen
This screen shows the status of the Input Contact Alarms. When
the I/O Monitor option is present, NetLink can monitor the Input
Contacts on the back panel. When a change in the status of the
input signal is detected, the unit can then perform a user-selected
Alarm Action.
Note that this screen does not list Action Parameters for the four
Input Contact Alarms. To review Action Parameters, please refer
to the Input Contact Alarm configuration screens described in
Section 11. The Status Screen lists the following items:
·
Contact Alarms (1 - 4):
Indicates if the Input Contact Alarm
is enabled for the corresponding Input Terminal.
·
Trigger Levels (1 - 4):
Lists the contact state that will trigger
an alarm at the corresponding Input Terminal.
6-13
Status Screens
PollCat NetLink
Version 3.22
05/08/2001 Tue 11:03
34% Full
INPUT CONTACT ALARM:
Contact 1 Alarm:
Off
Trigger Level 1:
High
Contact 2 Alarm:
Off
Trigger Level 2:
High
Contact 3 Alarm:
Off
Trigger Level 3:
High
Contact 4 Alarm:
Off
Trigger Level 4:
High
Press <ENTER> to return to menu ...
Figure 6.12: Input Contact Alarm Status Screen
Summary of Contents for PollCat NetLink
