WTI PollCat NetLink, User Manual

Page: 158 / 256

c) Start Record: Determines the starting point for data
release. Note that this value can be either a positive or
negative number. (Default = 1) .
•
Positive Numbers: If a positive number is entered,
NetLink will count forward from the beginning of the
records in the selected group (Source Port / Data
Type). For example, if this field is set at "15", then
NetLink will begin with the 15th record in the group.
•
Negative Numbers: If a negative number is entered,
NetLink will count backwards from the end of the
records in the selected group. For example if the Start
Record is set at "-3", then NetLink will send the last
three records in the selected group.
12. Push Action: This item enables / disables the FTP Push
operation. After you have selected FTP Push parameters,
make certain to set the Push Action to On. The Push Action
must be enabled in order for the FTP Push feature to
function. (Default = Off) .
Note: If the Push Action feature is "Off", the
selected FTP Push operation will not be performed.
13. Periodic Push: Defines the amount of time that will elapse
between FTP Push operations. This allows you to schedule
the FTP Push feature to regularly transfer data to your FTP
Server. For example, if the Periodic Push is set at 30
minutes, then every 30 minutes, the NetLink will
automatically transfer stored data to your FTP Server.
(1 to 9,999 Minutes, Default = 1,440 Minutes / 24 Hours) .
Notes:
·
A periodic FTP Push operation will be delayed if
targeted files are being accessed by another user at
the time scheduled for the data transfer. The
NetLink will delay the periodic push until the
other user releases the partition, or exits from
command mode. If the delay lasts longer than the
defined Xmit Delay period (see Item 15), the
periodic push will then be canceled.
·
A periodic push will not be performed if the
specified files are empty (no data) at the time
scheduled for the data transfer.
15-18
PollCat NetLink User's Guide