18.
Message:
Defines the message that will be sent for a
scheduled Callout, Alphanumeric Page, SNMP Trap, or
Console Action.
19.
Auto Execute:
When this item is enabled, NetLink can be
scheduled to automatically execute the command string
defined under item 20.
20.
Execute Commands:
The Auto-Execute command string.
This command string consists of a series of NetLink ^Bxx
commands, with each command separated by a backslash
character and a forward slash character (e.g.
\/04\/01
).
^Bxx commands are described in Section 18. For more
information on Auto-Execute command strings, please refer
to Section 12.3.
When the Schedule Action feature is used to download data
or send a wellness message, the Auto Execute string must
be defined in order to specify the exact task to be
performed. For example, to instruct the NetLink to
automatically send the Site ID message and then send all
alarm records, the Auto Execute string would be defined as
"
\/03\/01,ALM
".
Notes:
·
When the Auto-Execute string is defined,
commands are entered without the ^B character,
and each individual command is separated by a
slash character.
·
In order for the Auto Execute feature to function,
item 19 must be enabled, the command string must
be defined, and item 11 (Action) must be set to
perform a Callout or Console action.
13-4
PollCat NetLink User's Guide
Summary of Contents for PollCat NetLink
