·
Audit Trail:
When enabled, NetLink will log command
activity at this port.
·
Action Parameters:
The Action Delay lists the amount of
time that will elapse between actions sent out via this port.
·
Output Parameters:
Lists Output Parameters for this port:
§
Output Mode:
The format used when data is released via
this port; ASCII Record, Binary Block, Xmodem, or
Zmodem.
§
Data on ^B01:
When disabled, a ^B02 command will be
required in order to begin data release.
§
Hold End Data:
When enabled, a ^B02 command will be
required in order to release the "End Data" message.
§
Line # Tag:
When enabled, a line number will be inserted
at the beginning of each record released by this port.
§
Send Compressed:
When enabled, this port will release
data in space compressed format.
§
Auto Delete:
When enabled, stored data will be erased
after the polling device acknowledges reception.
·
Output Parameters (Binary Block):
Lists parameters that
are used when this port releases data in Binary Block format:
§
Transmit Attempts:
The number of transmit attempts, and
the length of the delay between attempts.
§
DLE Stuffing:
When enabled, literal characters can be
inserted into binary data released by this port.
6-22
PollCat NetLink User's Guide
Summary of Contents for PollCat NetLink
