6.10. 80% Full Alarm Status Screen
This screen lists parameters for the 80% Full Alarm. For more
information, please refer to Section 10. This status screen lists the
following:
·
80% Full Alarm:
The enabled/disabled status of the alarm.
·
Action:
The selected action that will be performed when an
80% Full Alarm is generated.
·
Phone Number:
The number dialed when the 80% Full
Alarm generates a callout or page action.
·
Pager ID Numbers:
The ID numbers that are used when the
80% Full Alarm generates an alphanumeric page.
·
SNMP Manager:
The SNMP manager that will receive
SNMP Traps generated by this alarm.
·
Output Contacts:
The Output Contact action that can be
performed when this alarm is triggered. A "C" means the
contact will be closed, an "O" means the contact will be
opened, a dash (-) means that the status of the contact will not
be changed.
·
Message:
The message sent when this alarm generates a
callout, alphanumeric page, SNMP Trap, or console action.
·
Auto Execute:
The On/Off state of the Auto Execute feature.
·
Execute Commands:
A command string that can be
automatically executed when the 80% Full Alarm is triggered.
6-12
PollCat NetLink User's Guide
PollCat NetLink
Version 3.22 05/08/2001 Tue 10:57 34% Full
80% FULL ALARM:
80% Full Alarm:
Off
Action:
None
Phone #:
(undefined)
Pager ID 1:
(undefined)
Pager ID 2:
(undefined)
Pager ID 3:
(undefined)
SNMP Mgmt:
Manager #1
Output Contacts
1/2/3/4:
-/-/-/-
Message:
(undefined)
Auto Execute:
Off
Execute Cmds:
(undefined)
(Cont.):
Press <ENTER> to return to menu ...
Figure 6.11: 80% Full Alarm Status Screen
Summary of Contents for PollCat NetLink
