2.
Pager ID #:
When testing an alphanumeric pager, this item
defines the Pager ID number. Type
2
, press
[Enter]
, and
follow the instructions in the submenu. Note that this
prompt is not used when testing a numeric pager.
3.
Type:
Selects a numeric or alphanumeric pager test.
Type
3
, press
[Enter]
, and follow the instructions in the
submenu.
4.
Start Test:
After entering the appropriate information at
the prompts, type
4
and press
[Enter]
to initiate the pager
test. To cancel a test in progress, use the "Clear Alarm
Condition" function as described in Section 16.1.4.
16.2.4. Send Test SNMP Trap(s)
This function will send a test SNMP trap to the network
manager(s). In order to function, SNMP Managers must first be
defined and selected as described in Section 4.4.5. When this
function is executed, NetLink will send an SNMP Trap to each
defined SNMP Manager.
16.3. Default Parameters
Main Menu item 21 will reset all NetLink parameters to default
settings. This function offers the option to include or omit
network parameters and Alarm Filter and Data Filter
configurations. To reset parameters to defaults, type
21
, press
[Enter]
and follow the instructions in the submenu.
16-10
PollCat NetLink User's Guide
Summary of Contents for PollCat NetLink
