^
B64
Enable / Disable Wrap Around Mode
(Supervisor Mode Only)
When NetLink's internal memory is full,
the wrap around mode allows new data to be written over older
data. This allows NetLink to continually recycle its memory.
Command Options:
^B64,1
Disable Wrap Around Mode
(Default)
^B64,2
Enable Wrap Around Mode
Corresponding Menu Function:
System Parameters Menu,
Item 5.
^
B65
Select Alarm Filters
(Supervisor Mode Only)
Determines which user-defined Alarm
Filter will be used for PBX Port A, PBX Port B, and the AUX
Port. This command uses the following format:
^B65[,port][,filter]
[Enter]
Where:
,port
Input Port:
If this argument is omitted, ^B56 will assign
the selected filter to PBX Port A. Offers the following
options:
,A
PBX Port A
(Default)
,B
PBX Port B
,X
AUX Port
,filter
Alarm Filter:
Selects or disables the Alarm Filter. The
following options are available:
,1
Disable Alarm Filter at Selected Port
(Default)
,2
Assign Alarm Filter #1 to Selected Port
,3
Assign Alarm Filter #2 to Selected Port
Corresponding Menu Function:
Port Configuration Menus (PBX
Port A, PBX Port B, AUX Port), Item 15.
18-20
PollCat NetLink User's Guide
Summary of Contents for PollCat NetLink
