WTI PollCat NetLink, User Manual, Page: 244 / 256

Cmd. Description / Options
^B96 Define AUX Port Communication Parameters
^B96[,baud][,parity][,data][,stop]
Where:
[,baud] Baud Rate: Can be any standard rate from 300 bps to
115.2 Kbps. If an asterisk is entered, the port will be set
at the default rate specified by Setup Switches 4 and 5.
[,parity] Parity Bits: Offers the Following Options:
,N No Parity
,O Odd Parity
,E Even Parity
[,data] Data Bits: Offers the Following Options:
,7 Seven Data Bits
,8 Eight Data Bits
[,stop] Stop Bits: Offers the Following Options:
,1 1 Stop Bit
,2 2 Stop Bits
^B97 Define/Display Network Parameters
^B97 Display Network Parameters
^B97,1,IPADDR Define IP Address; Where IPADDR is the
desired IP Address
^B97,1,[Space] Clear IP Address
^B97,2,SUBNET Define Subnet Mask Address; Where SUBNET
is the desired Subnet Mask Address
^B97,2,[Space] Clear Subnet Mask Address
^B97,3,GATE Define Gateway Address; Where GATE is the
desired Gateway Address
^B97,3,[Space] Clear Gateway Address
^B97,4,SNMP1 Define SNMP Manager #1; Where SNMP1 is
the desired SNMP Address
^B97,4,[Space] Clear SNMP Manager #1
^B97,5,SNMP2 Define SNMP Manager #2; Where SNPM2 is
the desired SNMP Manager
^B97,5[Space] Clear SNMP Manager #3
^B97,6,SNMPC Define SNMP Community; Where SNMPC is
the desired SNMP Community
^B97,6,[Space] Clear SNMP Community
^B98 Reset Network Port
^B98 Reset Network Port
^B98,Y Suppress "Sure" Prompt, Reset Network Port
^B99 Save Current Parameters
Apx-22
PollCat NetLink User's Guide