WTI PollCat NetLink, User Manual

Page: 57 / 256

6.6. Data Filters & Alarms Status Screen
This screen displays parameters for the Data Filters, Alarm Filters,
PBX Inactivity Alarms, 80% Full Alarm, and Input Contact Alarm.
The screen also lists Default Alarm Filter Actions, and shows the
status of the optional Input and Output Contacts.
·
Filters & Alarms: Shows which port(s) are currently
assigned to the Alarm Filters, Data Filters, and PBX Inactivity
Alarms. If a Filter or Alarm is not currently assigned, the
Port column will read “NONE”.
·
Other Alarms: The On/Off status of the 80% Full Alarm and
Input Contact Alarm.
·
Output Contacts: The Idle/Non-Alarm state for the output
contacts (optional).
·
Contacts Current State: The High/Low status of the
optional Input Contacts, and the Open/Closed status of the
optional Output Contacts.
·
Default Alarm Filter Action: NetLink will use these
defaults for all new alarm clues.
§ Action: The default action that is performed when an alarm
is generated; None, Callout, Alphanumeric Page, Numeric
Page, SNMP Trap, Output Contact, or Console action.
6-7
Status Screens
PollCat NetLink Version 3.22 05/08/2001 Tue 10:34 34% Full
DATA FILTERS & ALARMS:
FILTERS & ALARMS PORT DEFAULT ALARM FILTER ACTION
Alarm Filter 1: None (Used as Template for New Clues)
Alarm Filter 2: None Action: None
Data Filter 1: None Phone #: (undefined)
Data Filter 2: None (Cont.):
PBX Inact Alarm 1: None Pager ID 1: (undefined)
PBX Inact Alarm 2: None Pager ID 2: (undefined)
Pager ID 3: (undefined)
OTHER ALARMS SNMP Mgmt: Manager #1
80% Full Alarm: Off Output Contacts
Input Contact Alrm: Off 1/2/3/4: -/-/-/-
Message: (undefined)
OUTPUT CONTACTS (IDLE/NO ALARM) (Cont.):
Contacts 1/2/3/4: O/O/O/O (Cont.):
Auto Execute: Off
CONTACTS CURRENT STATE (1/2/3/4) Execute Cmds: (undefined)
Input Contacts: H/L/H/L (Cont.):
Output Contacts: C/C/C/C (Cont.):
(Cont.):
Press <ENTER> to return to menu ...
Figure 6.7: Data Filters & Alarms Status Screen