WTI PollCat NetLink, User Manual, Page: 213 / 256

^
B70 Enable/Disable Immediate Callout and
80% Full Alarm
(Supervisor Mode Only) Enables and configures the Immediate
Callout and 80% Full Alarm. When Immediate Callout is enabled,
NetLink will dial a user-defined Callout Number, approximately 5
seconds after a disconnect or loss of carrier. Note that the
Immediate Callout feature must be enabled prior to each use.
When the 80% Full Alarm is enabled, NetLink can perform any of
the standard Alarm Actions when internal memory becomes 80%
full. For more information, please refer to Section 10.
Command Options:
^B70 Disable Immediate Callout and 80% Full Alarm
^B70,I,1,1 Enable Immediate Callout
^B70,I,1,2 Disable Immediate Callout
^B70,I,2,n Define Immediate Callout Number
(Where n = Desired Immediate Callout Number.)
^B70,I,2, [Space] Clear Immediate Callout Number.
^B70,%,1,1 Enable 80% Full Alarm.
^B70,%,1,2 Disable 80% Full Alarm.
^B70,%,2,x Define notification action; Where x is the
desired action and
1
= None,
2
= Callout,
3 = Alphanumeric Page, 4 = Numeric Page,
5 = SNMP Trap, 6 = Output Contact Action, and
7 = Console Action.
^B70,%,3,n
Define number for 80% Full Callout or Page
(Where n is the desired phone number.)
^B70,%,3, [Space] Clear 80% Full callout number.
^B70,%,4,PagerID Define Pager ID Number 1 for 80% Full Alarm.
^B70,%,4,
[Space] Clear Pager ID Number 1.
^B70,%,5,PagerID Define Pager ID Number 2 for 80% Full Alarm.
^B70,%,5, [Space] Clear Pager ID Number 2.
^B70,%,6,PagerID Define Pager ID Number 3 for 80% Full Alarm.
^B70,%,6, [Space] Clear Pager ID Number 3.
^B70,%,7,message Define 80% Full Alarm Message. This message can be
sent when the alarm generates a Callout, Alphanumeric
Page, SNMP Trap or Console Action.
^B70,%,7, [Space] Clear 80% Full Alarm Message.
^B70,%,8,1 Enable Auto Execute Function for 80% Full Alarm.
^B70,%,8,2 Disable Auto Execute Function for 80% Full Alarm.
^B70,%,9,cmds Define the Auto Execute Command String for this
alarm. Where cmds is a series of ^Bxx commands,
with each command separated by a backslash character
followed by a forward slash ( \/ ).
^B70,%,9, [Space] Clear Auto Execute Command String.
Corresponding Menu Function: Immediate Callout; Modem Port
Configuration Menu, Item 34. 80% Full Alarm; Alarm
Configuration Menu, Item 5.
18-23
Command Reference Guide