WTI PollCat NetLink, User Manual, Page: 177 / 256

16.1.6. Download Parameters
The Download Parameters function is used to save NetLink
parameters and configuration settings to an ASCII file. For more
information on saving and restoring parameters, please refer to
Section 14.2.
16.1.7. Audit Trail
The Audit Trail Function displays a record of command activity at
the Console Port, Modem Port, and/or Network Port. When a
command port's Audit Trail function is activated, NetLink will
create a log which lists command activity at that port.
Each activity record is time/date stamped and arranged in
chronological order. The Audit Trail function uses flash memory
to store records for up to 64 command events. To create and
review the Audit Trail, proceed as follows:
1. Enable Audit Trail Log: Go to the configuration menu for
the desired port(s) (see Section 4.4), and enable the Audit
Trail. Item 15 in each command port configuration menu is
used to enable/disable the Audit Trail.
2. Log Actions: After enabling the Audit Trail at the desired
port, allow the port to log command actions. NetLink will
only log activity at ports where the Audit Trail is enabled.
3. Review Audit Trail Log: To display Audit Trail records,
access the System Functions menu (Main Menu, item 3).
From the System Functions menu, type 7 , press [Enter] to
display the Audit Trail Functions menu. The Audit Trail
Functions menu offers the following options:
a)
Set Audit Trail Read Parameters: This function
selects the Start Record and Record Count. The Start
Record determines where the data release will begin,
and the Record Count determines how many records will
be released at a time.
b) Enter Audit Trail Read Session: Displays log records
as specified by the Audit Trail Read Parameters.
c) Erase All Audit Trail Records: Erases log records.
Note that erased records cannot be recovered.
16-5
Other Menu Functions