4.4.
Port Configuration
To configure PBX Port A, PBX Port B, the AUX Port, Console
Port, Modem Port or Network Port, go to the Main Menu, type
22
and press
[Enter]
. The Port Selector Menu (Figure 4.3), will be
displayed. To select and configure ports, proceed as follows.
4.4.1.
PBX Port A and PBX Port B
From the Port Selector Menu, type
1
(for PBX Port A) or
2
(for
PBX Port B) and then press
[Enter]
. Both configuration menus
include the following items:
Communication Settings:
1.
Baud Rate:
Selects the baud rate for this port. Any
standard rate from 1200 bps to 115.2K bps.
(Default values
are selected by Set-Up Switches 4 and 5)
.
2.
Bits/Parity:
Selects Bits/Parity for this port; 8-None,
7-Even, 7-Odd, or 7-None.
(Default = 7-Even)
.
3.
Stop Bits:
Selects stop bits for this port.
(Default = 1)
.
4.
Handshake Mode:
Selects flow control for this port;
XON/XOFF, RTS/CTS, both, or None.
(Default = None)
.
Input Parameters:
11.
Time/Date Stamp:
The date stamp can be inserted at the
beginning of each record received by this port. This prompt
is used to disable the function, or select the short format or
long format. The short format (PollCat III Compatible) lists
Month, Date, Hour and Minute; the long format lists Month,
Date, Year, Hour, Minute, and Second. (
Default = Off
).
4-6
PollCat NetLink User's Guide
PORT CONFIGURATION:
1.
PBX Port A
2.
PBX Port B
3.
Auxiliary Port
4.
Console Port
5.
Modem Port
6.
Network Port
Enter Selection,
Press <ESC> to return to previous menu ...
Figure 4.3: Port Selector Menu
Summary of Contents for PollCat NetLink
