WTI PollCat NetLink, User Manual

Page: 29 / 256

12. Serial Number Stamp: Inserts a six digit serial number at
the beginning of each record received by this port.
( Default = Off ).
13. Strip Non-Printables: Conserves memory and cuts polling
time by excluding non-printable characters (such as Nuls
and Dels) from records received at this port.
( Default = On ).
14. End Character: Defines the End-of-Record (EOR)
character that NetLink expects to see at the end of each
record received at this port. ( Default = ^J (Line Feed) ).
15. Alarm Filter: Enables/disables the Alarm Filter and
selects the Alarm Filter used by the AUX port. The Alarm
Filter can notify the user when specific types of data are
detected. For more information, please refer to Section 8.
(Default = Off) .
16. Store Alarm Data: Determines where NetLink will store
alarm data received via this port. Alarm Records can be
stored in the Alarm File, the Standard (non-alarm) File, or
both files. For more information on files, please refer to
Section 15.1.1. (Default = Alarm)
17. Data Filter: Enables/disables the Data Filter and selects
the Data Filter used by this port. The Data Filter conserves
memory and cuts polling time by excluding records not
needed for your application. For more information, please
refer to Section 7. (Default = Off) .
18. PBX Inactivity Alarm: Enables/disables the PBX
Inactivity Alarm for this port. The PBX Inactivity Alarm
monitors the flow of data from the PBX Ports and notifies
the user if the flow stops. For more information, please
refer to Section 9. (Default = Off) .
19. Port Mode: Selects the operating mode for the AUX Port.
If the AUX Port will be connected to a PBX, the Port Mode
should be set to Store Data. If the AUX Port will be used to
pass commands to a connected device, the Port Mode should
probably be set to Discard Data. (Default = Store Data) .
4-9
Program Set-Up