WTI PollCat NetLink, User Manual

Page: 99 / 256

6. Define the Alarm Filter Format: The prompt at the
bottom of the menu is used to define the Alarm Filter.
a) Press the dash key to indicate a field position that you
do not need to monitor. In Figure 8.4, the last line
shows a Format Definition where dashes have been
entered in the first four fields of the call record.
b) When you reach a field you want to monitor, key in the
variable (any uppercase letter from A to Z) that will be
assigned to that position. For example, to assign the
variable "A" to the first seven digits of the number
dialed, enter seven A's ( AAAAAAA ) as shown in
Figure 8.4. The same variable is repeated for each
position in the field.
c) When you reach the end of the record, or the last
position you need to monitor, press [Enter] . The Alarm
Filter Format will be saved, and NetLink will return to
the Alarm Filter Configuration menu.
8-9
The Alarm Filters (Toll Fraud Detection)
DEFINE FORMAT:
In order to assist the user during format definition, several data records
and the previous format are displayed in the following order:
Data Records (If available)
Previous Format (If available)
Enter new format at cursor.
<Space><Enter> to clear.
Use upper case letters for fields,
'-' between fields
|08:16|075|B.JOHNSON |IN | |00:55|00.00|
|08:18|067|R.JONES |OUT|19495839514 |05:36|00.75|
|08:20|092|J.SMITH |OUT|18008547226 |11:15|00.00|
(undefined)
---------+---------+---------+---------+---------+---------+---------+---------
----------------------------------AAAAAAA
Figure 8.4: Alarm Filter Format Definition Example