8.5.2.
Editing and Deleting Clues
The Alarm Filter Configuration menu is used to edit existing clues,
delete clues or display parameters defined for each clue. To
display clue status or edit or delete clues, proceed as follows:
1. From the Main Menu, type
25
and press
[Enter]
. The
Alarm Configuration Menu will be displayed.
2. From the Alarm Configuration Menu, type
1
(for Alarm
Filter 1) or
2
(for Alarm Filter 2) and then press
[Enter]
.
The Alarm Filter Configuration Menu (Figure 8.2) will be
displayed.
3.
Display Clue Details:
To review parameters assigned to
each clue, type
2
and press
[Enter]
. NetLink will list all
clue names for this Alarm Filter. Key in the name of the
desired clue and press
[Enter]
; parameters for the specified
clue will be displayed.
4.
Edit Clues:
To alter an existing Clue, type
4
and press
[Enter]
. NetLink will list all clues defined for this Alarm
Filter. Key in the name of the desired clue and then press
[Enter]
. The Define/Edit Clue menu will be displayed.
5.
Delete Clues:
To delete an existing Clue, type
5
and press
[Enter]
. NetLink will list all clues defined for this Alarm
Filter. Key in the name of the clue that you wish to delete
and then press
[Enter]
. The clue will be deleted.
Note:
Deleted Alarm Clues
cannot
be automatically
recovered.
8-13
The Alarm Filters (Toll Fraud Detection)
Summary of Contents for PollCat NetLink
