4.
Enter "Read" Session:
When this item is selected,
NetLink will display a submenu before beginning data
release. The following options are available:
a)
Start Data Output:
To begin, press
[Enter]
.
b)
Next Group (^B02):
This is used when releasing
groups of records as described in Section 15.2.2. For
example, if Record Count is set at 10, NetLink will
release a group of ten records and then pause. To
release the next group, invoke command ^B02
(simultaneously press
[Ctrl]
and
[B]
, and then type
02
).
c)
Re-read Last Data Record (^B06):
This option is used
when releasing groups of records (Record Count) as
described in Section 15.2.2. For example, if Record
Count is set at 5, NetLink will release a group of five
records and then pause. To resend this group, invoke
command ^B06 (simultaneously press
[Ctrl]
and
[B]
,
then type
06
and press [Enter]).
d)
Exit (^B30):
To exit from data release mode and return
to the Buffer Functions menu, invoke command ^B30;
simultaneously press
[Ctrl]
and
[B]
, then type
30
and
press
[Enter]
.
Notes:
·
When all specified records have been released, the
"End Data" message is sent. If "Hold End Data" is
enabled, a ^B02 command is required in order to
release the End Data message and complete the
data release procedure.
·
If "Data On ^B01" is disabled, a ^B02 command
must be sent in order to begin the data release.
15-6
PollCat NetLink User's Guide
BUFFER FUNCTIONS:
1.
Set "Read" Session Parameters
2.
Set Partition
3.
Release Partition
4.
Enter "Read" Session
5.
Erase Partition Data
6.
Erase All Data
7.
Erase All Data & Clear Alarm Clue Counters
8.
Release Remote Partition
Enter Selection,
Press <ESC> to return to previous menu ...
Figure 15.2: Buffer Functions Menu
Summary of Contents for PollCat NetLink
