15.5. The FTP Server Feature
The FTP Server feature enables the NetLink unit to function like a
standard FTP server. You can connect to the NetLink using the
FTP client program of your choice, and then select and retrieve
files. In order to use this feature, your installation must include
the following components:
·
A network connection to the NetLink unit. Note that the
network must be running TCP/IP in order to use the NetLink's
FTP server function.
·
An FTP client (e.g. DOS FTP, WS FTP, Cute FTP, etc.)
installed on the remote PC which will drive the data release.
15.5.1. Configuring the FTP Server Feature
To configure the FTP Server function, access the command mode
as described in Section 18.1. From the Main Menu, type 28 and
press
[Enter]
to display the FTP Server Configuration menu
(Figure 15.6). This menu is used to define parameters that will be
employed when a user attempts to create an FTP connection with
the NetLink unit. To define FTP Server Parameters, key in the
number for the desired item, press
[Enter]
, then follow the
instructions in the submenus. The FTP Server Configuration menu
includes the following items:
FTP Server Parameters:
1.
User Name:
The name that a remote user will enter at their
FTP program's connect menu or prompt in order to create an
FTP connection to the NetLink unit.
(Up to 16
Characters; Default = Undefined)
.
15-22
PollCat NetLink User's Guide
FTP SERVER CONFIGURATION
FTP SERVER PARAMETERS
1.
User Name:
(undefined)
2.
Password:
(undefined)
3.
Filename:
(undefined)
4.
Auto Delete:
Off
5.
Audit Trail:
Off
MISCELLANEOUS
11. Stop FTP Session
Enter Selection,
Press <ESC> to Return to Previous Menu ...
Figure 15.6: FTP Server Configuration Menu (Defaults Shown)
Summary of Contents for PollCat NetLink
