![WEG SSW06 User Manual Download Page 4](http://html.mh-extra.com/html/weg/ssw06/ssw06_user-manual_950614004.webp)
Summary of Revisions
The table below describes the revisions made to this manual.
Revision
Description
Section
1
First edition
-
2
General revision
-
3
General revision
-
4
New software version
-
5
Implementation of the following current: 412A,
Chap 3
480A, 604A, 670A, 820A, 950A, 1100A and 1400A.
and 10
New software version with: braking methods
3, 4, 6
FWD/REV and Jog.
and 8
P140 was changed. E73 was eliminated.
E71 and E77 were changed.
6 General revision -
7
New software version with: new states in P006,
Chap 4,
full voltage and starting diagnostic functions,
6 and 8
storage of the 6 last errors, consumed energy,
torque and power protections, motor thermal
protection alarm, selection between alarm or fault,
automatic detection of the acceleration end with
voltage ramp, fast visualization of the parameters
through the key, detection of the
Profibus DP master in Stop, and the PLC Software,
inclusion of the E11, E18, E57, E58 and E59.
8
Change of the table 3.1 and figures 10.1, 10.3,
Chap 3 and
10.4, 10.5, 10.6 and 10.7.
10
9
Implementation of the following current:
-
10A, 16A, 23A, 30A, 45A e 60A.
11
New line voltage of 690V for standard motor
-
connection.
12
New software version with: digital inputs
-
DI1, DI2 and DI3 programmable for the
same functions, new current models of
1000A and 1300A in P295, new option of
Fatal Fault for P313, disable of the E77 Fault
through the P621 for use in multimotor
applications, new MMC block for SoftPLC,
new P951 parameter for enable of the IOs
exp
ansion card for SoftPLC, new
emergency start through digital input.
New optional kits KFB-DNIP, K-USB, K-IOE and K-ECA.
13
New optional kit, K-PT100.
6, 8 and 9
New parameters for optional kit K-PT100
(P091 to P095, P670 to P691).
New faults and alarms for optional
kit K-PT100 (E33 to E37, E39, E43 to E52).
14
Revision in table 3.9.
3
15
General revision
1
16 and 17
New software version: short circuit protection
-
function in the power of the SSW-06 with the motor
stopped (P622 and E19), new programming options
for digital outputs (grouping of protections).
18
Changes in item 3.2.4
3
Summary of Contents for SSW06
Page 2: ......