261
CHAPTER 8 - CFW-09 OPTIONS AND ACCESSORIES
Table 8.8
- Connections for remote keypad
cable from 7.5 m (22 ft) to 10 m (30 ft)
Table 8.7
- Connections for remote keypad
cable up to 5 m (15 ft)
Signal
+5 V
Rx
Tx
GND
+15 V
SHIELD
CABLE CONNECTION 5 m
(15 ft)
Connector Pin/
Inverter Side
1
2
3
4
8
9
Note:
The frame can be used or not.
H
M
I
In
v
e
rt
e
r
Figure 8.15
- Cable for remote keypad connection
10 m
Inverter
key pad (HMI)
Max. recommended cable length: 10 m (30 ft)
Connector DB9 - Male
Connector DB9 - Female
Insert spacer to connect
the cable to the inverter.
Remote HMI connection for distances higher than 10 m (30 ft):
The HMI can be connected to the inverter using a cable length up to 200 m
(600 ft). It is necessary to use an external power supply of 15 Vdc, according
to figure 8.16.
IH
M
In
ve
rs
or
+15 V
@ 300 mA
- Screw
- Do not use nut and washer
GND
Connector Pin/
HMI Side
2
3
4
8
9
CABLE CONNECTION > 5 m (> 15 ft)
Connector Pin/
Inverter Side
2
3
4
8
9
Note:
The frame must be used.
Figure 8.16
- Cable for remote keypad connection > 10 m
External power supply
Remote HMI connection for distances lower than 10 m (30 ft):
Connector Pin/
HMI Side
1
2
3
4
8
9
Signal
Rx
Tx
GND
+15 V
SHIELD
