![background image](http://html1.mh-extra.com/html/vari-lite/vl6-series/vl6-series_service-manual_3517718071.webp)
&
+$37(5
0
$,17(1$1&(
7
528%/(6+227,1*
73
C O N F I D E N T I A L
0 2 . 9 6 3 8 . 0 0 1 0
2 3 - A u g - 9 9
Step 6. Recalibrate color filter wheel, noting performance of Sensor PCB
and motor. Refer to
“Color/Gobo Wheel Calibration (Shop
.
a. If Sensor PCB is not functioning properly, then replace. Refer
to
“Wheel 1 or 2 Sensor PCB Replacement” on page 88
b. If motor is not functioning properly, then replace. Refer to
“Wheel 2 Motor Replacement” on page 90
.
Step 7. If symptom still persists, replace LCB. Refer to
1R*RER&RQWURO
If gobo wheel is not operating properly:
Step 1. Remove color bulkhead. Refer to
.
Step 2. Remove gobo wheel. Refer to
“Gobo/Filter Wheel Replacement”
Step 3. At motor stabilizer, check for installation (
). Check for
broken stabilizer, missing or broken spring, or missing flat
washer. Replace components as needed.
Step 4. Re-assemble luminaire and retest.
Step 5. If symptom still persists, remove color bulkhead.
Step 6. Recalibrate gobo filter wheel, noting performance of Sensor PCB
and motor. Refer to
“Color/Gobo Wheel Calibration (Shop
.
a. If Sensor PCB is not functioning properly, then replace. Refer
to
“Wheel 1 or 2 Sensor PCB Replacement” on page 88
b. If motor is not functioning properly, then replace. Refer to
“Wheel 1/Beam Iris Motors Replacement” on page 87
Step 7. If symptom still persists, replace LCB. Refer to
1R%HDP&RQWURO
If beam size iris is not operating properly:
Step 1. Remove color bulkhead. Refer to
.
Step 2. Remove gobo wheel.
Refer to