60
9
$5,
/
,7(
9/9/%6
327
/
80,1$,5(
6
(59,&(
0
$18$/
0 2 . 9 6 3 8 . 0 0 1 0
C O N F I D E N T I A L
2 3 - A u g - 9 9
CAUTION: Wear cotton gloves when handling lamp.
c. If cap does not have a counterweight mounting hole, drill a
mounting hole as follows:
1) Carefully remove lamp from lamp socket.
2) Place counterweight in back cap, observing proper orien-
tation.
3) With counterweight in place, drill 0.201" diameter hole
through back cap. (Be careful not to damage lamp wires
or lamp socket assembly.)
4) Re-install lamp in lamp socket.
d. Using screwdriver, secure counterweight to back cap with a
10-32x7/8" PPB screw and 10-32 KEPS nut.
e. Reconnect tether.
f.
Carefully re-install lamp assembly.
Step 5. Re-assemble luminaire.
,QVWDOOLQJ:LGH)LHOGRI9LHZ/HQV
Parts:Parts:
1 EA ASSY, WIDE-ANGLE LENS(22.9638.0167)
2 EA RETAINING RING, EXTERNAL 1/4" SHAFT DIA.
(54.2007.0001)
if needed:
1 EA ASSY, COUNTER WEIGHT - WIDE ANGLE LENS
(22.9638.0184)
1 EA SCREW, 10-32X7/8"PPB (53.6538.0001)
1 EA NUT, 10-32 KEPS (53.2001.0001)
Tools:
Screwdriver, Phillips #2
Screwdriver, #2 slotted
Nutdriver, 1/4 inch
Pliers, needle nose
Pliers, snap ring
Versilube (06.6027.0001)
Drill with 3/16 inch drill bit (if needed)
White cotton gloves or finger cots
To install wide field lens (and counterweight):
Step 1. Remove current lens assembly. Refer to
.
Step 2. Apply Versilube to guide shafts if needed.
