130
9
$5,
/
,7(
9/9/%6
327
/
80,1$,5(
6
(59,&(
0
$18$/
0 2 . 9 6 3 8 . 0 0 1 0
C O N F I D E N T I A L
2 3 - A u g - 9 9
:KHUH7R8VH/RFWLWH3URGXFWV
It is important to remember that Loctite is to be used only in the applica-
tions listed below.
CAUTION: Unapproved use of Loctite can cause equipment failures.
Loctite 242, Removable-Blue (06.6008.0001)
•
Screws securing linear actuator motors to actuator mount.
•
Screws that secure pan/tilt mechanism to tilt side leg and bottom cross
member.
•
Standoffs in yoke leg and top cross member that secure heatshields.
Loctite 272, Hi-Temp-Red (06.6009.0050)
•
Ends of drive ring pins before inserting in drive ring.
•
End of setscrew in drive ring.
•
Smaller threads of linear actuator shaft where it enters drive ring link.
•
Screws securing center hub assembly to bulkhead.
•
Screws securing light baffle assembly to bulkhead.
•
Screws securing heatsink cap to heatsink.
Loctite 425, Surface Curing-Purple (06.6008.0003)
•
Tilt driven pulley/collet acorn nuts.
•
Screws securing Maxon motor mount to motor.
•
Clutch assembly standoffs at ends that secure top plate to standoffs.
Loctite 567, Pipe Sealant-White (06.6010.0050)
•
Screws securing tilt axis tube to hinge side rail.
•
Screws securing tilt axis tube to latched side rail.
•
Threads of aluminum body (comes with Kellems cord grip) where it
enters hole in base of pan tube.
•
Screws securing linear actuator motor assembly heatshields to
bulkheads.
•
Screws securing lamp wire plate to hinged side rail.
•
Screws securing light baffles to standoffs.
Loctite 680, High Strength-Green (06-.6008.0002)
•
Inside worm attached to pan/tilt mechanism Maxon motor.
