![background image](http://html1.mh-extra.com/html/vari-lite/vl6-series/vl6-series_service-manual_3517718042.webp)
44
9
$5,
/
,7(
9/9/%6
327
/
80,1$,5(
6
(59,&(
0
$18$/
0 2 . 9 6 3 8 . 0 0 1 0
C O N F I D E N T I A L
2 3 - A u g - 9 9
Step 2. Secure fixed leg to pan tube with two 5/16-18 bolts and nuts, and
two 1/4"ID flat washers.
Step 3. Secure pivoting legs to pan tube with, on each leg, one 5/16-18
bolt and nut; with two clutch disc springs, and one 1/4"ID flat
washer between the bolt and the leg, one 1/4"ID flat washer
between the leg and the pan tube. (Ensure clutch disc springs are
installed with concave surfaces facing the flat washer as shown.)
Step 4. Using nutdriver, tighten nuts and bolts until proper tension is
obtained; just enough so pivoting legs stay where you put them,
but not so much that they do not pivot.
DETAIL A
Rubber Bumper
5/16-18 Bolt
1/4” Flat Washer
Pivoting Leg
Pan Tube
Fixed Leg
Clutch Spring
1/4” Flat Washer
5/16-24 Nut
Roll Pin
Pivoting Leg
5/16-18 Nut
5/16-18 Bolt
1/4” Washer
Pivoting Leg
5/16-18 Nut
See Detail A...
1/4” Washer
Clutch Springs
Note orientation of
PTM clutch springs.