&
+$37(5
0
$,17(1$1&(
<
2.(
$
66(0%/<
111
C O N F I D E N T I A L
0 2 . 9 6 3 8 . 0 0 1 0
2 3 - A u g - 9 9
Step 13. Remove installation tool. Ensure that pulley is secure.
Step 14. Re-install pan tube stop, and re-install yoke top cross member
assembly onto luminaire, ensure to replace pan mechanism belt
during process. Ensure pan stop points towards pan mechanism.
Step 15. Place shim on pan tube and secure pan tube in place with
retaining ring.
Step 16. Secure yoke top cross member in place with 12, 8-32x3/8" PPSS
screws.
Step 17. Re-install pan mechanism (removed in Step 7).
Step 18. Re-install 10-32x1" SCSS belt adjustment screw and #10 flat
washer and tighten (
). Refer to
Step 19. Re-assemble remaining components by doing steps 2 through 6 in
reverse.
