&
+$37(5
,
167$//$7,21
,
167$//$7,21
+
$5':$5(
43
C O N F I D E N T I A L
0 2 . 9 6 3 8 . 0 0 1 0
2 3 - A u g - 9 9
To prepare the legs for installation:
Step 1. Install one rubber bumper on each pivoting leg (at opposite ends)
with one 5/16-24 nut. (Pivoting legs are the same until the
bumpers are added.) Apply Loctite 242 to the threaded studs and
ensure that both nuts are tightened very tight.
Step 2. Install roll pin in fixed leg, ensuring that it is centered (sticking-
out an equal distance on either side).
Step 3. Install one rubber bumper on fixed leg with a 5/16-24 nut. (The
bumper goes on the end opposite the roll pin.)
To install the legs:
Step 1. Rotate pan tube until input cable is positioned as needed.
Pivoting Legs
Input Cable
Recommended
Optional
Fixed Leg
Install bumpers at opposite
ends of pivoting legs.
Location
Location
