Technical Data
Technical data TBEN-S2-8DXP
232
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | [email protected] | www.turck.com
14.9
Technical data TBEN-S2-8DXP
The device has eight DXP channels. Up to eight 3-wire PNP sensors or eight PNP DC actuators
can be connected.
Technical data
Power supply
Operating current (from V1)
< 150 mA
Sensor/actuator supply VAUX1
Supply connector C0…C1 from V1,
supply at pin1 of the switchable per connector,
short-circuit proof, 0.5 A per connector
Sensor/actuator supply VAUX2
Supply connector C2…C3 from V2,
supply at pin1 of the switchable per connector,
short-circuit proof, 0.5 A per connector
Potential isolation
From V1 and V2 voltage group,
voltages up to 500 VDC
Digital inputs
Number of channels
8
Connection technology
M12, 5-pin
Input type
EN 61131-2 type 3, PNP
Type of input diagnostics
Channel diagnostics
Signal voltage low level
< 5 V
Signal voltage high level
> 11 V
Signal current low level
< 1.5 mA
Signal current high level
> 2 mA
Input resistance low level
Min. 3.33 kΩ
Input resistance high level
Max. 5.5 kΩ
Input delay
0.2 ms/3 ms
Input frequency
400 Hz
Potential isolation
Galvanic isolation to P1/P2,
voltage proof up to 500 VDC
Digital outputs
Number of channels
8
Connection technology
M12, 5-pin
Output type
PNP
Type of output diagnostics
Channel diagnostics
Output voltage
24 VDC from potential group
Output current per channel
HW rev. < 2: 0.5 A, short-circuit-proof
HW rev. < 2: 2 A, short-circuit-proof
Load type
EN 60947-5-1: DC-13
Load type (UL condition)
Resistive, pilot duty
Short-circuit protection
Yes
Potential isolation
Galvanic isolation to P1/P2,
voltage proof up to 500 VDC
General information
MTTF
238 years acc. to SN 29500 (Ed. 99) 20 °C
