E4.
Instrumentation and Electronic Jacquard for
Towel Weaving Machine
[1]
Jacquard Controller
Refer to the instruction manual issued by the manufacture of the shedding motion.
[2]
Types of Interfaces between the Loom and the Jacquard
The design data (including the warp texture) include the loom’s pattern data information (hereinafter referred to as
PICK data). The loom reads the PICK data from the Jacquard controller for operation.
There are two types of specifications as shown below. They are different from each other in how the PICK data is read
from the Jacquard controller.
The PICK data varies depending on the specification. Therefore, create design data according to your loom’s
specification.
(1) Parallel system (JAT600 / 610 / 710 system)
This system is referred to as "Classic type".
(2) Serial system (JAT810 system)
This system is referred to as "new CAN type"
NOTE:
The conventional parallel system is also available for JAT810.
・
Difference between the parallel and serial systems
No.
Item
Serial system
Parallel system
1
Pile length type
A, B
+
8 types
A, B
2
Density
16 types
8 types
3
Pile tension
4 types
2 types
4
Loom speed
3 steps
2 steps
E4.
Instrumentation and Electronic Jacquard for Towel Weaving Machine
69
