[2] Zero-point Restoration Proximity Switch
Do not disturb the zero-point restoration proximity switch which has been adjusted in TOYOTA.
If the proximity switch setting is changed, adjust the switch according to the steps below.
(1) Set the MANUAL
–
AUTO switch in the inverter
servo amplifier box to the MANUAL position.
(2) Move the terry motion lever with the FWDREV
switch until lever’s hole A becomes aligned with
hole B provided in the sub frame.
(3) Check the alignment by inserting a straight pin or
bolt (ø8 mm) into holes A and B.
(4) Press and lock the emergency stop button.
(5) Install the terry motion lever flag and the proximity
switch according to the dimensions shown at left.
Turn the machine power on and check that the
proximity switch LED is OFF.
M9. Electronic Terry Motion
43
