[1.6] Setting the warp manual stop position
Select the warp manual stop position during pile
weaving.
In the initial setting, the loom stops at L2 pick.
Change the setting if any alteration in organization is
desired.
NOTE
: Be careful since the machine does not stop for
8 picks if L4 for 3-pile, which does not exist in
the pattern, is selected.
When [AUTO] is set for the stop position item, the
loom stops at the pick before F1.
You less frequently need to change the setting for 4- to
7-pick piles or long/short pile.
lso, when you want to specify a specific stop pick, set
the position. Otherwise, set to [None].
E1. Setting of Towel Loom-related Function Panel
48
