[1.3] Bearing installation
(1) Mark the point A below from inside a bearing
shaft 9:
(2) Insert a bearing 10 to the bearing shaft 9.
(3) Insert a hoop 11 so as to have the inside of the
bearing 10 matches the marking made in (1).
Then tighten the bolt 12 to position the bearing
10.
(4) Bearing shaft 9 is attached to the machine.
Remove bolt 13 and bearing shaft 9 from the
empty yarn beam when replacing the beams.
Gland beam
Beam gear side
25.5mm
Counter beam gear side
28.0mm
Pile beam
Beam gear side
92.5mm
Counter beam gear side
65.0mm
M1. Preparation for Setting
6
