NOTE
: Decide the length of fell plate 1 according to
the weaving width, and then cut and remove
the rest. Finish the section smooth with tools
such as a file to prevent persons from injury
or a yarn from getting stuck.
[7] Periodic Maintenance of Temple Base
A rolling bearing is used to smoothly move the temple
base in the longitudinal direction. Accumulation of fly or
fleece between the rolling bearing and the guide plates
causes grease sucking and overload to the outer ring, thus
resulting in damage to the bearing.
Be sure to remove fly or fleece at every beam change.
Then, apply grease on the rolling contact surface.
M3. Temple
18
