[2.2] Adjustment of vertical position ofdropper box bracket
(1) Lock the emergency stop pushbutton switch.
(2) Loosen the fixing bolts 9 and 10.
(3) Remove a bolt 6.
(4) Loosen a nut 12 and adjust the height with an
adjust bolt 11.
NOTE
: Since the only contact point is the adjust
bolt 11, overall inclination may be
changed.
(5) Tighten the bolts 6, 9, and 10 loosened in (2) and
(3) for the height and inclination adjustment to fix
the dropper box bracket 13.
NOTE
: If the groove of the pile easing shaft lever
5 does not match the bolt hole of the joint
plate 7, loosen the bolt 8 to match the
hole.
(6) Tighten a nut 12 of the adjust bolt 11.
M7. Warp Stop Device
37
