(6) If the cloth fell has not returned to the zero position for ground weave:
1
．
Set the MANUAL-AUTO switch to the AUTO
position.
2
．
Carry out the zero-point restoration.
・
If this operation has returned the cloth fell to the
zero point, check the wiring between the servo
amplifier and the main control box.
・
If this operation has failed to return it, turn off the
machine power, unplug and plug the resolver
cable connector of the servo amplifier, and then
turn on the machine power.
・
Next, register the zero point (refer to [ 2 ]
Installation).
3
．
Adjust the mounting position of the zero-point
restoration proximity switch. (Refer to Section M9.
2.)
Zero-point restoration
Set the MANUAL-AUTO
switch to MANUAL.
↓
Press the ZERO POSITION
button.
E5. Electronic Terry Motion
107
