[1.4]
Sheet counter for test pattern weaving
NOTE:
Displayed for the dobby specification only.
[ OFF ]
The number of sheets is not counted during test pattern weaving.
Set to OFF when a test pattern is used for test or waste weaving.
[ ON ]
The number of sheets is counted for test pattern weaving.
[1.5]
Cutting
[Sheet count stop]
The loom stops operation when the number for the
cutting is reached.
NOTE
: Set the cutting number on the [Operator]-
[Cutting] screen shown at left.
NOTE
: Preliminary weaving pick or cutting pick is
not used.
[PRELIMINARY WEAVE STOP]
When either of both settings is selected, the loom
operates as shown below.
[Cutting stop]
Note that the loom RESTARTS after preliminary
weaving as opposed to when [PRELIMINARY
WEAVE STOP] is selected.
(1) When the cutting number reaches the set cutting
number, extra weaving operation starts.
・
Extra weaving operation
[In case of Jacquard]
・
Density is as per the set value in (7).
・
No terry operation
[For the electronic dobby]
・
Weaving in the pattern selected for extra
weaving
・
No terry operation
E1. Setting of Towel Loom-related Function Panel
46
