(2)
For the Classic design (in the case of signals created in [3-1] mentioned above)
[Jacquard]
Same as the new CAN design in 1) mentioned
above.
[Density]
There are eight setting items that correspond to
the densities (0) to (7) for A-9) to -11).
[Average density]
Same as the new CAN design in 1) mentioned
above.
[Density ratio]
Same as the new CAN design in 1) mentioned
above.
[Pile length]
When [Wave weaving] is set to [Use]
There are the setting items of Pile length (A, B)
and Step length (A, B).
When [Wave weaving] is set to [Not use]
There are the eight setting items from [0] to [7]
for Pile length.
For the Classic design, you can use either the
wave weaving setting or the pile length setting.
[L1-L2 (single)]
When A-18) is a single signal
A set length is added to L2 pile length.as
deviation length.
[L1-L2 amount (double)]
When A-18) is a double signal
A set length is added to the L2 pile length as
deviation length.
[Pile ratio]
Same as the new CAN design in 1) mentioned
above.
[Leveling]
Same as the new CAN design in 1) mentioned
above.
E4.
Instrumentation and Electronic Jacquard for Towel Weaving Machine
83
