[3] Setting for beam change
Touch the [ Operator ]
–
[ Beam Change ] icon to display
the screen shown at left.
(1) [ BOTTOM BEAM ] switch
Press this switch for setting upon bottom beam
replacement.
Refer to 3.2 [4] b [ BEAMSET ] Switch in “0.3
Detailed Explanation of Function Panel” of the
Standard Machine “Instruction Manual” for the
operation method.
(2) TOP BEAM ] switch
Press this switch for setting upon top beam
replacement.
Refer to 3.2 [4] b [ BEAMSET ] Switch in “0.3
Detailed Explanation of Function Panel” of the
Standard Machine “Instruction Manual” for the
operation method.
(3) Style name and Beam name
・
The style name and beam name are registered as
the host data in the TMS or TTCS specification
for use as management data.
・
In case of a non-networked loom, these are used
only for reference on this screen.
E2. Setting and Operation of Towel Loom Beam-relatedFunction Panel
56
