[Pile tension] *2
a
．
When the pile tension signals are composed of
indexes (1) to (3)
・
The upper beam tension is changed to a set
tension.
・
Use this setting when you want to set a
different tension for each texture such as
long/short pile.
・
However, the tension is not changed instantly.
Therefore, set a step while observing the actual
pile.
・
For index (0), the tension does not change.
・
The tension value set for [0] shown at left is the
same as the upper beam tension value for pile
weaving on the LETOFF screen. When the
tension for [0] is changed, the upper beam
tension for pile weaving will be also changed.
[Leveling] *1
Use this setting when you want to place all warp
yarns at the cloth position in auto leveling status
upon loom stop.
You can make an individual setting by stop cause
for pile and ground (other than pile) warps.
Normally, set to [USE] for any stop cause other
than weft fault stop issued to ground warp (other
than pile warp).
※
1 For the specifications other than the towel
specification, only one item is displayed
because no pile-related item is displayed.
※
2 Not displayed for the specifications other
than the towel specification.
E4.
Instrumentation and Electronic Jacquard for Towel Weaving Machine
82
