[2] Oil Change of Terry Motion Cam Box
(1) Oil type and replacement period are as follows:
(Standard lubrication quantity is 8 liters.)
Reference
:
Type:
Oil B #150 (Mobilgear 600 XP 150, etc.)
Replacement period:
Once a year after the initial replacement
(2) Drain used oil by inserting a drain tool into the drain
port.
(3) Fill oil until the oil level reaches the center of the
level gauge 1.
NOTE
: Refer to “M.3 Lubrication” in the Standard
Machine “Instruction Manual.”
[3]
Oil Change and Grease Replenishment of Jacquard Bevel
Gearbox
(1) Oil change period is as follows:
(Standard lubrication quantity is 2 liters.)
Reference
:
Type:
Oil B #150 (Mobilgear 600 XP 150, etc.)
Replacement period:
Initial: after 15 million picks)
Every 6 months after the initial replacement.
(2) Drain used oil by inserting a drain tool into the drain
port.
(3) Fill oil until the oil level reaches the center of the
level gauge 1.
(4) Check oil level monthly. Replenish oil if below the
required level.
(5) Replenish grease D from the grease nipple 2 once a
month. At this time, do so until the grease slightly
overflows the oil seal on the output shaft side.Wipe
off the overflowed grease.
NOTE
: Refer to "M.3 Lubrication" in the Standard
Machine "Instruction Manual."
M8. Lubrication
41
