[3] Jacquard Shedding Specifications
Refer to the instruction manual of Jacquard shedding motion for the handling method.
[3.1] Height of Top Rail Bracket
(1) Loosen a nut 4.
(2) Loosen a bolt 2.
(3) Turn an adjust bolt 3 and adjust a height A of a
top rail bracket 1.
(Standard dimension of height A is 55 mm.)
(4) Tighten the bolt 2 to fasten top rail bracket 1.
(5) Tighten the nut 4.
[3.2] Hanging of Draw Yarn
1. The left end position of draw yarn is 200 mm from the machined face inside the L.H. frame.
2. Determine the longitudinal position of draw yarn bysetting heald No. 1 to a point 43 mm from the rear face of
the rocking shaft.
M2. Shedding Motion
13
