Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 58

Page: 58 / 491

COROLLA HV_ 国瑞 _GE

1-2. Child safety

• “universal”

• “semi-universal”

• “restricted”

• “vehicle specific”

: UN(ECE) R44 and UN(ECE) R129

are U.N. regulations for child

restraint systems.

: The child restraint systems men-

tioned in the table may not be availa-

ble outside of the EU area.

: The displayed mark may differ

depending on the product.

■

Compatibility of each seating
position with child restraint
systems



Left-hand drive vehicles



Right-hand drive vehicles

*1, 2, 3

Suitable for “universal” category

child restraint system fixed with

the seat belt.

Suitable for child restraint sys-

tems given on recommended

child restraint systems and

compatibility table. (



P.58)

Suitable for i-Size and ISOFIX

child restraint system.

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands