Toyota Corolla Hybrid 2019, Owner'S Manual

Page: 236 / 491

234
COROLLA HV_ 国瑞 _GE
4-5. Using the driving support systems
Fine adjustment: Press the switch.
Large adjustment: Press and hold the
switch to change the speed, and
release when the desired speed is
reached.
In the vehicle-to-vehicle distance
control mode, the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*1
or 1 mph (1.6 km/h)
*2
each time the
switch is pressed
Large adjustment: Increases or
decreases in 5 km/h (3.1 mph)
*1
or 5
mph (8 km/h)
*2
increments for as long
as the switch is held
In the constant speed control mode
(

P.236), the set speed will be
increased or decreased as follows:
Fine adjustment: By 1 km/h (0.6 mph)
*1
or 1 mph (1.6 km/h)
*2
each time the
switch is pressed
Large adjustment: The speed will con-
tinue to change while the switch is held.
*1
: When the set speed is shown in
“km/h”
*2
: When the set speed is shown in
“MPH”
Pressing the switch changes the
vehicle-to-vehicle distance as fol-
lows:
1 Long
2 Medium
3 Short
The vehicle-to-vehicle distance is set
automatically to long mode when the
power switch is turned to ON.
If a vehicle is running ahead of you, the
preceding vehicle mark
will also be
displayed.
Select a distance from the table
below. Note that the distances
shown correspond to a vehicle
speed of 80 km/h (50 mph). Vehi-
cle-to-vehicle distance
increases/decreases in accord-
ance with vehicle speed. When the
vehicle is stopped by system con-
trol, the vehicle stops at a certain
vehicle-to-vehicle distance depend-
ing on the situation.
Changing the vehi-
cle-to-vehicle distance (vehi-
cle-to-vehicle distance
control mode)
Vehicle-to-vehicle distance
settings (vehicle-to-vehicle
distance control mode)
COROLLA HYBRID_OM_General_OM12M44E