Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 302

Page: 302 / 491

300

COROLLA HV_ 国瑞 _GE

5-5. Using an external device

■

USB memory

●

Compatible devices

USB memory that can be used for MP3,

WMA and AAC playback

●

Compatible device formats

The following device formats can be

used:

• USB communication formats: USB2.0

FS (12mbps)

• File formats: FAT16/32 (Windows)

• Correspondence class: Mass storage

class

MP3, WMA and AAC files written in any

format other than those listed above

may not play correctly, and their file

names and folder names may not be

displayed correctly.
Items related to standards and limita-

tions are as follows:

• Maximum directory hierarchy: 8 levels

(including the root)

• Maximum number of folders in a

device: 3000

• Maximum number of files in a device:

9999

• Maximum number of files per folder:

255

●

MP3, WMA and AAC files

MP3 (MPEG Audio LAYER3) is a stan-

dard audio compression format.
Files can be compressed to approxi-

mately 1/10 of their original size by

using MP3 compression.
WMA (Windows Media Audio) is a

Microsoft audio compression format.
This format compresses audio data to a

size smaller than that of the MP3 format.
AAC is short for Advanced Audio Cod-

ing and refers to an audio compression

technology standard used with MPEG2

and MPEG4.
There is a limit to the MP3, WMA and

AAC file standards and to the media/for-

mats recorded by them that can be

used.

●

MP3 file compatibility

• Compatible standards MP3
(MPEG1 LAYER3, MPEG2 LSF LAY-

ER3)

• Compatible sampling frequencies
MPEG1 LAYER3: 32, 44.1, 48 (kHz)
MPEG2 LSF LAYER3: 16, 22.05, 24

(kHz)

• Compatible bit rates (compatible with

VBR)

MPEG1 LAYER3: 32-320 (kbps)
MPEG2 LSF LAYER3: 8-160 (kbps)

Message

Cause/Correction

procedures

“USB ERROR”

This indicates that

the data in the

USB memory can-

not be read.

“ERROR 3”

This indicates that

the USB memory

may be malfunc-

tioning.

“ERROR 4”

This indicates that

an over current

error has occurred.

“ERROR 5”

This indicates that

the USB memory

communication

error has occurred.

“NO MUSIC”

This indicates that

MP3/WMA/AAC

files are included

on the USB mem-

ory device.

“Hubs are not sup-

ported”

This indicates that

the hub connect

error occurs.

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands