Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 38 / 491

COROLLA HV_ 国瑞 _GE

1-1. For safe use



For Taiwan

The pretensioners help the seat

belts to quickly restrain the occu-

pants by retracting the seat belts

when the vehicle is subjected to

certain types of severe frontal or

side collision.

The pretensioners do not activate in the

event of a minor frontal impact, a minor

side impact, a rear impact or a vehicle

rollover.

■

Replacing the belt after the
pretensioner has been activated

If the vehicle is involved in multiple colli-

sions, the pretensioner will activate for

the first collision, but will not activate for

the second or subsequent collisions.

WARNING

■

Seat belt pretensioners

If the pretensioner has activated, the

SRS warning light will come on. In

that case, the seat belt cannot be

used again and must be replaced at

your Toyota dealer.

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands