Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 68

Page: 68 / 491

COROLLA HV_ 国瑞 _GE

1-2. Child safety

: Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar and

Kuwait

■

Installing child restraint sys-
tem using a seat belt

Install the child restraint system in

accordance to the operation man-

ual enclosed with the child restraint

system.

If the child restraint system on hand

is not within the “universal” cate-

gory (or the necessary information

is not in the table), refer to the

“Vehicle List” provided by the child

restraint system maker for various

possible installation positions, or

check the compatibility after asking

the retailer of the child seat.

(



P.54, P.59)

If installing the child restraint

system to the front passenger

seat is unavoidable, refer to

P.50 for the front passenger seat

adjustment.

If the head restraint interferes

with your child restraint system,

Top tether anchorage

attachment

Seats with an adjustable type head

restraint:

Seats with an integrated type head

restraint:

P.70

Installation method

Page

Child restraint system fixed
with a seat belt

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands